Penguin Edge™

5MP MIPI-CSI Camera Adapter

SKU: ACC-1H10-00-P3

NOT AVAILABLE FOR NEW DESIGNS

The Penguin Edge™ ACC-1H10 from Penguin Solutions™ is a YUV format camera module that uses Omnivision’s OV5640 sensor. FullHD H264 video recording at 30fps and 5 Mega Pixel JPEG image capture is possible with this accessory which is suitable for all variants of Penguin Solutions platforms based on Snapdragon 410E and Snapdragon 600E. Low power consumption and a small form factor makes it an ideal camera peripheral. Features include anti-shake technology, AF Control, integrated JPEG compression engine, and automatic image control functions. The accessory comes with the necessary cables to interface with the MIPI-CSI FI-R connectors available on all compatible Penguin Solutions platforms.

Data Sheet

5 Mega Pixel Camera Sensor Module board with MIPI-CSI 41-pin/51-pin FI-R connectors

This camera module accessory has an on board camera sensor from OmniVision (OV5640). Low power consumption and a small form factor makes it an ideal camera peripheral. Features include anti-shake technology, AF Control, integrated JPEG compression engine, and automatic image control functions. It supports 5 MP still image capture along with 720p@60 fps and 1080p@30 fps video streaming capability. The accessory comes with the necessary cables to interface with the MIPI-CSI FI-R connectors available on all compatible Penguin Solutions platforms.

Block Diagram

block diagram

Specifications

OV5640 Camera Adapter Card Features

  • Automatic image control functions
  • Color CMOS 5 Megapixel image sensor
  • Dual lane MIPI CSI interface to APQ8064 device
  • Supports video and snapshot modes
  • Max video rates: 5 MP (2592×1944): 15 fps; 1080P: 30fps; 720P: 60 fps
  • Anti-shake, Auto Focus, and Black Sun Cancellation
  • Programmable I/O Drive Capability, I/O tri-state configurability
  • Embedded Microcontroller

Camera SoC Sensor Specs

  • Omnivision OV5640 5-Megapixel System-on-chip
  • Image sensor: 1.4 μm x 1.4 μm pixel with OmniBSI technology for high perf
  • Active array size: 2592 x 1944
  • Optical size of 1/4”
  • Automatic image control functions: automatic exposure control (AEC), automatic white balance (AWB), automatic band filter (ABF), automatic 50/60 Hz luminance detection, and automatic black level calibration (ALBC)
  • Input clock frequency 6 ~ 27 MHz
  • Max S/N ratio: 36 dB
  • Dynamic range: 68 dB @ 8x gain

Power, Mechanical, and Environmental

  • Camera module dimensions: 8.6mm x 8.6mm x 5.0mm
  • Camera adapter card dimensions: 40.6mm x 43.97mm x 5.0mm
  • Connector : 41-pin/51-pin MIPI-CSI FI-R type connectors and cable
  • Power supply: Core: 1.5 V ± 5% (with embedded 1.5 V Regulator)
  • Analog: 2.6 ~ 3.0 V (2.8 V typical) ; I/O: 1.8 V/ 2.8 V
  • Power requirements : Active: 140 mA, Standby: 20 μA
  • Temperature range: Operating: -30° C to 70° C junction temp.

Compatible Platforms

  • All platforms

QDevTechweb

  • Early access to leading edge APIs and next generation features.
  • A product roadmap that keeps developers on the latest technology curve from Qualcomm

Documentation

Document
ACC-1H10 5MP MIPI-CSI Camera Adapter Board Datasheet Download